Model
YT/TLC-50+55+50
YT/TLC-55+65+55
YT/TLC-65+80+65
Unit
Material
HDPE, LDPE, LLDPE, EVA, IPP, MPE
Film Width(Max.)
1200
1500
2100
MM
Extrusion Output
120~150
180~250
250~350
KG/HR
Extruder
Screw Diameter
Ø50mm x 2sets
Ø55mm x 1set
Ø55mm x 2sets
Ø65mm x 1set
Ø65mm x 2sets
Ø80mm x 1set
MM
Screw Length
30:1
30:1
30:1
L/D
Barrel Cooling
1/16 x 4(2+2)
1/8 x 2
1/8 x 6(2+2+2)
1/8 x 6(2+2+2)
HP/SET
Temp. Control
9 (3+3+3)
9 (3+3+3)
10 (3+4+3)
ZONE
Drive Motor
(AC Motor with Inverter)
25HP x 2sets
40HP x 1set
40HP x 2sets
50 HP x 1set
50HP x 2sets
75 HP x 1set

HP
Extruding Die
3 Layer Co-Extrusion Die (A-B-C)
Die Size
200/250/300
300/350/400
400/450/500
MM
Temp. Control
4
4
4
ZONE
Cooling Equipment
Chill Air Cooling Type
Air Type Chiller
15
20
25
TON
Air Blower
(with inverter)
7.5
10
15

HP
Air Ring
1
1
1
SET
Take-Up Unit(Fixed type)
Pinch Roller
Ø210 x 1300
Ø210 x 1600
Ø210 x 2200
MM
Driving Motor
(AC Motor with Inverter)
2
2
3
HP
Line Speed (Max.)
6~60
6~60
6~60
M/MIN
Auxiliary Take-Up Unit
Pinch Roller
Ø120 x 1300
Ø120 x 1600
Ø140 x 2200
MM
Driving Motor
30
30
50
KG/CM
Winder
Type
Auto Roll Change Winder(MMI Control System)
Roller Width
1300
1600
2200
MM
Driving Motor(AC Motor)
2
2
3
HP
Winding Diameter
900
900
900
MM
Machine Size
8x4.5x7.15
8x5x9.15
10x6.5x11.15
M
Power Consumption
110
150
210
KW
Optional: Auto loader, masterbatch feeder, pressure gauge, rotary die device, embossing roller, edge position control(E.P.C) device, edge trim winder, waste edge film recycled into extruder unit, side open knife, edge trim(center slitting) knife, back-to-back winder, corona surface treater, horizontal type oscillating take-up unit, internal bubble cooling(I.B.C.) system, heat slitting knife...etc.
  As we continuously keep working on research and improvement, we preserve the right to change all of the specifications, design and characteristics on this catalogue without notice.